Model
OBAIR FP-102KQ Cassette Fan Coil Unit
OBAIR FP-102KQ is a catalogue-listed fan coil unit with 33 published technical parameters. Selection requires confirmation of project conditions.
When to consider this equipment
Use this category when air must be heated or cooled close to the occupied zone. Final capacity, water temperatures, noise and installation arrangement must be checked for the project.
What to include in an enquiry
Provide room duty, entering and leaving water temperatures, airflow or acoustic limits, mounting arrangement and available service space. Source coverage for this row is partial; missing values remain unfilled.
Verified technical data
FP-102KQ
- Rated airflow - high speed
- 1020 m3/h
- Rated airflow - medium speed
- 790 m3/h
- Rated airflow - low speed
- 520 m3/h
- Cooling capacity - high speed
- 6030 W
- Cooling capacity - medium speed
- 4322 W
- Cooling capacity - low speed
- 2854 W
- Heating capacity - high speed
- 8160 W
- Heating capacity - medium
- 6315 W
- Heating capacity - low
- 4140 W
- Fan quantity
- 1 count
- Motor input power
- 92 W
- Water mass flow rate
- 1036 kg/h
- Water resistance
- 22 kPa
- FCEER limit value
- 60 W/W
- FCCOP limit value
- 81 W/W
- Noise - high speed
- 45 dB(A)
- Noise - medium speed
- 43 dB(A)
- Noise - low speed
- 40 dB(A)
- Power supply
- 220V/~/50Hz
- Heat-exchanger configuration
- Copper tubes with high-efficiency flanged aluminum fins, mechanically expanded and tightened
- Heat-exchanger working pressure
- 1.6 MPa
- Inlet and outlet pipe
- Rc3/4 (Tapered pipe internal thread)
- Condensate drain pipe
- φ26
- Dimension a
- 225.0–235.0 mm
- Dimension b
- 290 mm
- Dimension c
- 60 mm
- Dimension d
- 300.0–305.0 mm
- Panel dimension A
- 800 mm
- Ceiling opening dimension B
- 730.0–760.0 mm
- Indoor-unit body dimension C
- 720 mm
- Lifting-ear dimension D
- 757 mm
- Lifting-ear dimension D1
- 340 mm
- Net weight
- 27 kg
On request
3D model not yet available
Selection from project conditions is available on enquiry