Model
OBAIR Low-temperature Air Source Heat Pump - AHP****HEG1N [75]
OBAIR Low-temperature Air Source Heat Pump - AHP****HEG1N [75] is listed in the OBAIR catalogue. Length: 2200 mm; Width: 1100 mm. Confirm the project operating conditions before selection.
When to consider this equipment
Use this category for chilled-water or heat-pump duties after the design temperatures, capacity, ambient or source conditions and hydraulic arrangement are known.
What to include in an enquiry
Provide cooling and heating duty, water temperatures and flow, ambient or source range, refrigerant restrictions, electrical supply, sound limits and redundancy requirements.
Verified technical data
AHP****HEG1N [75]
- Published model pattern
- AHP****HEG1N
- Literal model column token
- 75
- Rated cooling capacity at 35°C
- 75 kW
- Rated-cooling input power at 35°C
- 21.8 kW
- Rated heating capacity at 7°C
- 87.5 kW
- Rated-heating input power at 7°C
- 24 kW
- Source-labeled nominal cooling (-12°C) / heating capacity
- 57 kW
- Source-labeled nominal cooling (-12°C) input power
- 20.3 kW
- Compressor count
- 2 count
- Number of axial fans
- 2 count
- Water volume flow rate
- 13 m3/h
- Water pressure drop
- 50 kPa
- Connecting pipe diameter
- 65 DN
- Length
- 2200 mm
- Width
- 1100 mm
- Height
- 2400 mm
- Unit weight
- 760 kg
- Operating weight
- 900 kg
- Power supply
- Three-phase, five-wire system AC380V/3N~/ 50Hz
- Compressor type
- Hermetic Scroll-Type Compressor (EVI)
- Axial fan type
- Water-proof, weather-resistant, low-noise, high-efficiency axial fan
- Water-side heat exchanger type
- Shell-and-Tube Heat Exchanger / 1.0MPa
- Throttling method
- Electric Expansion Valves
- Refrigerant
- R410A
On request
3D model not yet available
Selection from project conditions is available on enquiry