Model
OBAIR FLLG***GCH1N | 42000 — R407C heat-pump variant
OBAIR FLLG***GCH1N | 42000 — R407C heat-pump variant is listed in the OBAIR catalogue. Cooling capacity: 2000 kW; Heating capacity: 2160 kW. Confirm the project operating conditions before selection.
When to consider this equipment
Use this category for chilled-water or heat-pump duties after the design temperatures, capacity, ambient or source conditions and hydraulic arrangement are known.
What to include in an enquiry
Provide cooling and heating duty, water temperatures and flow, ambient or source range, refrigerant restrictions, electrical supply, sound limits and redundancy requirements.
Verified technical data
FLLG***GCH1N | 42000
- Cooling capacity
- 2000 kW
- Total cooling input power
- 604 kW
- Heating capacity
- 2160 kW
- Total heating input power
- 590.4 kW
- Power supply
- Three-phase, five-wire system AC380V/3N~/ 50Hz
- Compressor type
- Semi-hermetic screw
- Compressor start-up method
- Y-△
- Compressor count
- 4 count
- Axial-fan type
- Water-proof, weather-resistant, low-noise, high-efficiency axial fans
- Number of axial fans
- 32 count
- Water-side heat-exchanger type / pressure
- Horizontal Shell-and-Tube Heat Exchanger / 1.0MPa
- Water-side heat-exchanger flow rate
- 344 m3/h
- Water-side heat-exchanger pressure drop
- 60 kPa
- Inlet/outlet water-pipe connections
- 125×4sets DN
- Outline length
- 17700 mm
- Outline width
- 2200 mm
- Outline height
- 2720 mm
- Throttling mode
- Electric Expansion Valve
- Refrigerant type
- R407C
- Unit weight
- 18200 kg
- Operating weight
- 19000 kg
On request
3D model not yet available
Selection from project conditions is available on enquiry