Model

OBAIR WHP Series Single Compressor P160 — WHP****MARSN [1090]

OBAIR WHP Series Single Compressor P160 — WHP****MARSN [1090] is listed in the OBAIR catalogue. Cooling capacity: 326 kW; Heating capacity: 336 kW. Confirm the project operating conditions before selection.

When to consider this equipment

Use this category for chilled-water or heat-pump duties after the design temperatures, capacity, ambient or source conditions and hydraulic arrangement are known.

What to include in an enquiry

Provide cooling and heating duty, water temperatures and flow, ambient or source range, refrigerant restrictions, electrical supply, sound limits and redundancy requirements.

Verified technical data

WHP****MARSN [1090]

Published model pattern
WHP****MARSN
Literal model column token
1090
Cooling capacity
326 kW
Cooling input power
50.6 kW
Cooling input current
89.1 A
Cooling EER
6.44 W/W
Cooling evaporator water flow rate
56 m3/h
Cooling evaporator water pressure drop
46 kPa
Cooling evaporator pipe size
DN100 mm
Cooling condenser water flow rate
34 m3/h
Cooling condenser water pressure drop
24 kPa
Cooling condenser pipe size
DN100 mm
Heating capacity
336 kW
Heating input power
64.4 kW
Heating input current
113.3 A
Heating COP
5.22 W/W
Heating evaporator water flow rate
33.6 m3/h
Heating evaporator water pressure drop
23 kPa
Heating evaporator pipe size
DN100 mm
Heating condenser water flow rate
56.1 m3/h
Heating condenser water pressure drop
47 kPa
Heating condenser pipe size
DN100 mm
Annual comprehensive performance coefficient
5.9 kW/kW
Energy-efficiency rating
Level 2
Compressor count
1 count
Compressor type
Semi-closed Twin-screw Compressor
Compressor start-up method
Star-Delta
Partial-load energy regulation range
Infinite Capacity Control
Maximum operating current
172 A
Unit start-up current
272 A
Refrigerant type
R134a
Refrigerant charge
101 kg
Length
3000 mm
Width
1600 mm
Height
1700 mm
Unit weight
2430 kg
Operating weight
2560 kg
Manufacturer source

On request

3D model not yet available

Selection from project conditions is available on enquiry