Model

OBAIR WHP Series Single Compressor P161 — WHP****MARSN [1285]

OBAIR WHP Series Single Compressor P161 — WHP****MARSN [1285] is listed in the OBAIR catalogue. Cooling capacity: 1015 kW; Heating capacity: 1044 kW. Confirm the project operating conditions before selection.

When to consider this equipment

Use this category for chilled-water or heat-pump duties after the design temperatures, capacity, ambient or source conditions and hydraulic arrangement are known.

What to include in an enquiry

Provide cooling and heating duty, water temperatures and flow, ambient or source range, refrigerant restrictions, electrical supply, sound limits and redundancy requirements.

Verified technical data

WHP****MARSN [1285]

Published model pattern
WHP****MARSN
Literal model column token
1285
Cooling capacity
1015 kW
Cooling input power
156.9 kW
Cooling input current
279.3 A
Cooling EER
6.47 W/W
Cooling evaporator water flow rate
175 m3/h
Cooling evaporator water pressure drop
73 kPa
Cooling evaporator pipe size
DN150 mm
Cooling condenser water flow rate
105 m3/h
Cooling condenser water pressure drop
33 kPa
Cooling condenser pipe size
DN150 mm
Heating capacity
1044 kW
Heating input power
198.9 kW
Heating input current
354.0 A
Heating COP
5.25 W/W
Heating evaporator water flow rate
104.5 m3/h
Heating evaporator water pressure drop
30 kPa
Heating evaporator pipe size
DN150 mm
Heating condenser water flow rate
174.6 m3/h
Heating condenser water pressure drop
57 kPa
Heating condenser pipe size
DN150 mm
Annual comprehensive performance coefficient
5.93 kW/kW
Energy-efficiency rating
Level 2
Compressor count
1 count
Compressor type
Semi-closed Twin-screw Compressor
Compressor start-up method
Star-Delta
Partial-load energy regulation range
Infinite Capacity Control
Maximum operating current
540 A
Unit start-up current
852 A
Refrigerant type
R134a
Refrigerant charge
314 kg
Length
3550 mm
Width
1600 mm
Height
1950 mm
Unit weight
4400 kg
Operating weight
4720 kg
Manufacturer source

On request

3D model not yet available

Selection from project conditions is available on enquiry