Model

OBAIR WHP Series Single Compressor P161 — WHP****MARSN [1310]

OBAIR WHP Series Single Compressor P161 — WHP****MARSN [1310] is listed in the OBAIR catalogue. Cooling capacity: 1104 kW; Heating capacity: 1136 kW. Confirm the project operating conditions before selection.

When to consider this equipment

Use this category for chilled-water or heat-pump duties after the design temperatures, capacity, ambient or source conditions and hydraulic arrangement are known.

What to include in an enquiry

Provide cooling and heating duty, water temperatures and flow, ambient or source range, refrigerant restrictions, electrical supply, sound limits and redundancy requirements.

Verified technical data

WHP****MARSN [1310]

Published model pattern
WHP****MARSN
Literal model column token
1310
Cooling capacity
1104 kW
Cooling input power
171.0 kW
Cooling input current
304.4 A
Cooling EER
6.46 W/W
Cooling evaporator water flow rate
190 m3/h
Cooling evaporator water pressure drop
71 kPa
Cooling evaporator pipe size
DN200 mm
Cooling condenser water flow rate
114 m3/h
Cooling condenser water pressure drop
30 kPa
Cooling condenser pipe size
DN200 mm
Heating capacity
1136 kW
Heating input power
213.3 kW
Heating input current
379.7 A
Heating COP
5.33 W/W
Heating evaporator water flow rate
113.7 m3/h
Heating evaporator water pressure drop
29 kPa
Heating evaporator pipe size
DN200 mm
Heating condenser water flow rate
189.9 m3/h
Heating condenser water pressure drop
57 kPa
Heating condenser pipe size
DN200 mm
Annual comprehensive performance coefficient
5.96 kW/kW
Energy-efficiency rating
Level 2
Compressor count
1 count
Compressor type
Semi-closed Twin-screw Compressor
Compressor start-up method
Star-Delta
Partial-load energy regulation range
Infinite Capacity Control
Maximum operating current
579 A
Unit start-up current
928 A
Refrigerant type
R134a
Refrigerant charge
341 kg
Length
3550 mm
Width
1600 mm
Height
1950 mm
Unit weight
4600 kg
Operating weight
4940 kg
Manufacturer source

On request

3D model not yet available

Selection from project conditions is available on enquiry