Model
OBAIR ZYJ-10 — JX fresh-air unit
OBAIR ZYJ-10 — JX fresh-air unit is listed in the OBAIR catalogue. Motor power: 7.5 kW; Rated airflow rate: 10000 m3/h. Confirm the project operating conditions before selection.
When to consider this equipment
Use this category for ventilation or air-handling duties. The section sequence, filtration, heating, cooling, recovery and control functions must follow the project air states.
What to include in an enquiry
Provide supply and extract airflow, outdoor and indoor design conditions, external static pressure, filtration class, heating and cooling duties, dimensions and service constraints.
Verified technical data
ZYJ-10
- Configuration variant
- JX Technical Parameters (Fresh Air Unit)
- Rated airflow rate
- 10000 m3/h
- Airflow rate range
- 9500.0–11000.0 m3/h
- External static pressure
- 550 Pa
- Motor power
- 7.5 kW
- Two-pipe cooling capacity, return-air condition, 2R
- 138.2 kW
- Two-pipe cooling capacity, return-air condition, 4R
- 172.8 kW
- Two-pipe cooling capacity, return-air condition, 6R
- 186.6 kW
- 42°C hot-water coil heating capacity, 1R
- 39.2 kW
- 42°C hot-water coil heating capacity, 2R
- 59.6 kW
- 42°C hot-water coil heating capacity, 4R
- 90.6 kW
- 60°C hot-water coil heating capacity, 1R
- 70 kW
- 60°C hot-water coil heating capacity, 2R
- 105.7 kW
- 60°C hot-water coil heating capacity, 4R
- 160.7 kW
- Steam-coil heating capacity, 1R
- 81.4 kW
- Steam-coil heating capacity, 2R
- 131.9 kW
- Air-cooled direct-expansion cooling capacity
- 52.4 kW
- Outdoor-unit model
- SW200
- Return-air inlet dimensions
- 1360*810 mm
- Supply-air outlet dimensions
- 1000*510 mm
- Condensing-water pipe
- DN32
- Dehumidification and reheating
- 6HP
- JX1 unit length
- 3900 mm
- JX1 unit width
- 1550 mm
- JX1 unit height
- 1330 mm
- JX2 unit length
- 4100 mm
- JX2 unit width
- 1550 mm
- JX2 unit height
- 1330 mm
On request
3D model not yet available
Selection from project conditions is available on enquiry