Model

TRANP TRP052 brazed plate heat exchanger

TRP052 shares its catalog W dimension and maximum connection size with TRP028, but has a taller H dimension and a larger single-plate heat exchange area. It is a useful comparison when reviewing two plate formats with the same stated width and connection limit.

Request selection+7 771 109 16 88
Catalogue view of a brazed plate heat exchanger with four threaded connectionsEnlarge image
Catalogue illustration of brazed construction. The model shown is not identified; this image does not establish the appearance of the selected model.

Construction and service considerations

Prepare operating data for this equipment

When to consider this equipment

Include TRP052 in a brazed heat exchanger enquiry when the available height can accommodate the taller catalog outline. Heating, cooling, evaporation or condensation must be defined as an operating duty; a larger plate area alone does not confirm a higher rated output for the required temperatures and flows.

What to include in an enquiry

For replacement work, check H and h rather than relying on the shared W value. Ask for the actual unit depth, fitting details and an approved dimensioned drawing. Confirm the fluid pair, temperatures, flow or duty, working pressure and pressure-drop limits. Final materials and operating ratings are not specified by this 2022 sizing table.

Verified technical data

TRP052

Single-plate heat exchange area
0.052 m²
Catalog dimension H
527 mm
Catalog dimension W
111 mm
Catalog dimension h
466 mm
Catalog dimension w
50 mm
Maximum connection size (catalog limit)
1.25 in

3D model not yet available

Selection from project conditions is available on enquiry