Model
TRANP TRP210 brazed plate heat exchanger
TRP210 increases the catalog H/W dimensions, single-plate area and maximum connection size relative to TRP136. It has the second-largest single-plate area among the nine models in the cited table. This identifies its place within that published size range without assigning a rated capacity.
Enlarge imageConstruction and service considerations
Prepare operating data for this equipment
When to consider this equipment
Use TRP210 as a model reference when comparing the larger formats in TRANP's brazed family for a heating or cooling project. Check the installation space and connection-size requirement alongside the thermal duty; a larger connection limit does not by itself establish an acceptable flow rate.
What to include in an enquiry
Provide the two circuit programs, fluid properties, pressure and allowable pressure loss, and request the selected assembly's drawing and calculation. Verify delivered fittings, materials and depth rather than treating the catalog maximum as a complete specification. Current operating ratings and configuration details remain a separate confirmation.
Verified technical data
TRP210
- Single-plate heat exchange area
- 0.21 m²
- Catalog dimension H
- 739 mm
- Catalog dimension W
- 322 mm
- Catalog dimension h
- 603 mm
- Catalog dimension w
- 188 mm
- Maximum connection size (catalog limit)
- 4 in
3D model not yet available
Selection from project conditions is available on enquiry